CONTÁCTENOS - 91 575 78 24
RSS
Estás en www.ingenieriayarte.com
Si no encuentra un libro lo buscamos por Ud.
91 575 78 24

CESTA DE LA COMPRA

Tiene 0 productos en su cesta Importe total: 0
> > ACI´s 2015 Manual of Concrete Practice 7 Vol.

Por favor introduzca la cantidad deseada y pulse sobre el carrito.

1350 €/Ud.
Cantidad:

ACI´s 2015 Manual of Concrete Practice 7 Vol.

Autor:

Descripción

The ACI MANUAL OF CONCRETE PRACTICE (MCP) is the most comprehensive concrete reference set available. It contains all of the widely used ACI concrete and masonry code requirements, specifications, guides and reports.


Características

  • Tamaño: 21x30
  • Edición:
  • Idioma: Inglés
  • Año: 2015

Compra bajo pedidoDisponibilidad: Inmediata

Contenido ACI´s 2015 Manual of Concrete Practice 7 Vol.

The ACI MANUAL OF CONCRETE PRACTICE (MCP) is the most comprehensive concrete reference set available. It contains all of the widely used ACI concrete and masonry code requirements, specifications, guides and reports.

- The largest, single source of concrete information in one set of books

- More than 240 documents

- Seven parts, plus a separate index

- Documents in numerical order

Comprehensive and Authoritative

Developed to be comprehensive. The MCP contains all of the ACI documents you need to answer your questions about code requirements, specifications, tolerances, concrete proportions, construction methods, evaluations of test results, and many more topics. In fact, the MCP includes over 240 of the most used documents on concrete technology. It includes the 2014 version of ACI's Building Code for Structural Concrete & Commentary (318-14)

The Most-Used Documents on Concrete Technology

An encyclopedia of concrete technology, the MCP has information needed by the engineer, architect, contractor, concrete/concrete product producer. . . Everyone involved in the design and use of concrete.

Topics Include:

- Design of reinforced concrete and masonry structures

- Design and construction of floors on grade, pavements, and parking lots

- Specification writing

- Concrete mixture proportioning

- Concrete mixing, transporting, and placing

- Hot- and cold-weather concreting

- Formwork

- Inspection and testing

- Construction tolerances

- Repair, Renovation, and Rehabilitation

- Troubleshooting


Table of Contents


VOLUMEN .1


117-10 Specification for Tolerances for Concrete Construction and Materials (ACI 117-10) and Commentary

117.1R-14 Guide for Tolerance Compatibility in Concrete Construction

121R-08 Guide for Concrete Construction Quality Systems in Conformance with ISO 9001

122R-14 Guide to Thermal Properties of Concrete and Masonry Systems

201.1R-08 Guide for Conducting a Visual Inspection of Concrete in Service

201.2R-08 Guide to Durable Concrete

207.1R-05 Reapproved 2012 Guide to Mass Concrete

207.2R-07 Report on Thermal and Volume Change Effects on Cracking of Mass Concrete

207.3R-94 Reapproved 2008 Practices for Evaluation of Concrete in Existing Massive Structures for Service Conditions

207.4R-05 Reapproved 2012 Cooling and Insulating Systems for Mass Concrete

207.5R-11 Report on Roller-Compacted Mass Concrete

209R-92 Reapproved 2008 Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures

209.1R-05 Report on Factors Affecting Shrinkage and Creep of Hardened Concrete

209.2R-08 Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete

210R-93 Reapproved 2008 Erosion of Concrete in Hydraulic Structures

211.1-91 Reapproved 2009 Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete

211.2-98 Reapproved 2004 Standard Practice for Selecting Proportions for Structural Lightweight Concrete

211.3R-02 Reapproved 2009 Guide for Selecting Proportions for No-Slump Concrete

211.4R-08 Guide for Selecting Proportions for High-Strength Concrete Using Portland Cement and Other Cementitious Materials

211.5R-14 Guide for Submittal of Concrete Proportions

211.6T-14 Aggregate Suspension Mixture Proportioning Method

212.3R-10 Report on Chemical Admixtures for Concrete

213R-14 Guide for Structural Lightweight-Aggregate Concrete

214R-11 Guide to Evaluation of Strength Test Results of Concrete

214.4R-10 Guide for Obtaining Cores and Interpreting Compressive Strength Results

216.1-14 Code Requirements for Determining Fire Resistance of Concrete and Masonry Construction Assemblies

221R-96 Reapproved 2001 Guide for Use of Normal Weight and Heavyweight Aggregates in Concrete

221.1R-98 Reapproved 2008 Report on Alkali-Aggregate Reactivity

222R-01 Reapproved 2010 Protection of Metals in Concrete Against Corrosion

222.2R-14 Report on Corrosion of Prestressing Steels

222.3R-11 Guide to Design and Construction Practices to Mitigate Corrosion of Reinforcement in Concrete Structures

223R-10 Guide for the Use of Shrinkage-Compensating Concrete

224R-01 Reapproved 2008 Control of Cracking in Concrete Structures

224.1R-07 Causes, Evaluation, and Repair of Cracks in Concrete Structures

224.2R-92 Reapproved 2004 Cracking of Concrete Members in Direct Tension

224.3R-95 Reapproved 2013 Joints in Concrete Construction

224.4R-13 Guide to Design Detailing to Mitigate Cracking

225R-99 Reapproved 2009 Guide to the Selection and Use of Hydraulic Cements

228.1R-03 In-Place Methods to Estimate Concrete Strength


VOLUMEN .2


228.2R-13 Report on Nondestructive Test Methods for Evaluation of Concrete in Structures

229R-13 Report on Controlled Low-Strength Materials

230.1R-09 Report on Soil Cement

231R-10 Report on Early-Age Cracking: Causes, Measurement, and Mitigation

232.1R-12 Report on the Use of Raw or Processed Natural Pozzolans in Concrete

232.2R-03 Use of Fly Ash in Concrete

232.3R-14 Report on High-Volume Fly Ash Concrete for Structural Applications

233R-03 Reapproved 2011 Slag Cement in Concrete and Mortar

234R-06 Reapproved 2012 Guide for the Use of Silica Fume in Concrete

237R-07 Self-Consolidating Concrete

238.1R-08 Report on Measurements of Workability and Rheology of Fresh Concrete

238.2T-14 Concrete Thixotropy

301-10 Specifications for Structural Concrete

SP-15(10) Field Reference Manual (Synopsis only)

302.1R-04 Guide for Concrete Floor and Slab Construction

302.2R-06 Guide for Concrete Slabs that Receive Moisture-Sensitive Flooring Materials

303R-12 Guide to Cast-in-Place Architectural Concrete Practice

303.1-97 Standard Specification for Cast-in-Place Architectural Concrete

304R-00 Reapproved 2009 Guide for Measuring, Mixing, Transporting, and Placing Concrete

304.2R-96 Reapproved 2008 Placing Concrete by Pumping Methods

304.3R-96 Reapproved 2004 Heavyweight Concrete: Measuring, Mixing, Transporting, and Placing

304.4R-95 Reapproved 2008 Placing Concrete with Belt Conveyors

304.6R-09 Guide for Use of Volumetric-Measuring and Continuous-Mixing Concrete Equipment

305R-10 Guide to Hot Weather Concreting

305.1-14 Specification for Hot Weather Concreting

306R-10 Guide to Cold Weather Concreting

306.1-90 Reapproved 2002 Standard Specification for Cold Weather Concreting

307-08 Code Requirements for Reinforced Concrete Chimneys (ACI 307-08) and Commentary

308R-01 Reapproved 2008 Guide to Curing Concrete

(308-213)R-13 Report on Internally Cured Concrete Using Prewetted Absorptive Lightweight Aggregate

308.1-11 Specification for Curing Concrete

309R-05 Guide for Consolidation of Concrete

309.1R-08 Report on Behavior of Fresh Concrete During Vibration

309.2R-98 Reapproved 2005 Identification and Control of Visible Effects of Consolidation on Formed Concrete Surfaces

309.5R-00 Reapproved 2006 Compaction of Roller-Compacted Concrete

310R-13 Guide to Decorative Concrete

311.1R-07 ACI Manual of Concrete Inspection-SP-2(07) (Synopsis only)

311.4R-05 Guide for Concrete Inspection

311.5-04 Guide for Concrete Plant Inspection and Testing of Ready-Mixed Concrete

311.6-09 Specification for Ready Mixed Concrete Testing Services

311.7-14 Inspection Services Specification for Cast-in-Place Concrete Construction

313-97 Standard Practice for Design and Construction of Concrete Silos and

Stacking Tubes for Storing Granular Materials

313R-97 Commentary on Standard Practice for Design and Construction of Concrete Silos and Stacking Tubes for Storing Granular Materials

314R-11 Guide to Simplified Design for Reinforced Concrete Buildings

SP-66(04) ACI Detailing Manual (Synopsis only)


VOLUMEN .3


318-14 Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary (ACI 318R-14)

318.2-14 Building Code Requirements for Concrete Thin Shells (ACI 318.2-14) and Commentary (ACI 318.2R-14)

325.10R-95 Reapproved 2001 Report on Roller-Compacted Concrete Pavements

325.11R-01 Accelerated Techniques for Concrete Paving

325.12R-02 Reapproved 2013 Guide for Design of Jointed Concrete Pavements for Streets and Local Roads

325.13R-06 Concrete Overlays for Pavement Rehabilitation

329R-14 Guide to Performance-Based Requirements for Concrete

330R-08 Guide for the Design and Construction of Concrete Parking Lots

330.1-14 Specification for Unreinforced Concrete Parking Lots and Site Paving

332-14 Residential Code Requirements for Structural Concrete (ACI 332-14) and Commentary

332.1R-06 Guide to Residential Concrete Construction

334.1R-92 Reapproved 2002 Concrete Shell Structures-Practice and Commentary

334.3R-05 Construction of Concrete Shells Using Inflated Forms

336.1-01 Specification for the Construction of Drilled Piers

336.2R-88 Reapproved 2002 Suggested Analysis and Design Procedures for Combined Footings and Mats

336.3R-14 Report on Design and Construction of Drilled Piers

341.2R-14 Report on Analysis and Design of Seismic-Resistant Concrete Bridge Systems

341.3R-07 Seismic Evaluation and Retrofit Techniques for Concrete Bridges

343R-95 Reapproved 2004 Analysis and Design of Reinforced Concrete Bridge Structures

343.1R-12 Guide for the Analysis and Design of Reinforced and Prestressed Concrete Guideway Structures

345R-11 Guide for Concrete Highway Bridge Deck Construction

345.1R-06 Guide for Maintenance of Concrete Bridge Members

345.2R-13 Guide for Widening Highway Bridges

346-09 Specification for Cast-in-Place Concrete Pipe


VOLUMEN .4


347R-14 Guide to Formwork for Concrete

347.2R-05 Guide for Shoring/Reshoring of Concrete Multistory Buildings

347.3R-13 Guide to Formed Concrete Surfaces

SP-4 Formwork for Concrete (Synopsis only)

349-13 Code Requirements for Nuclear Safety-Related Concrete Structures (ACI 349-13) and Commentary

349.1R-07 Reinforced Concrete Design for Thermal Effects on Nuclear Power Plant Structures

349.2R-07 Reapproved 2014 Guide to the Concrete Capacity Design (CCD) Method-Embedment Design Examples

349.3R-02 Reapproved 2010 Evaluation of Existing Nuclear Safety-Related Concrete Structures

350-06 Code Requirements for Environmental Engineering Concrete Structures (ACI 350-06) and Commentary

350.1-10 Specification for Tightness Testing of Environmental Engineering Concrete Containment Structures (ACI 350.1-10) and Commentary

350.2R-04 Concrete Structures for Containment of Hazardous Materials

350.3-06 Seismic Design of Liquid-Containing Concrete Structures (ACI 350.3-06) and Commentary

350.4R-04 Design Considerations for Environmental Engineering Concrete Structures

350.5-12 Specifications for Environmental Concrete Structures

351.1R-12 Report on Grouting between Foundations and Bases for Support of Equipment and Machinery

351.2R-10 Report on Foundations for Static Equipment

351.3R-04 Reapproved 2011 Foundations for Dynamic Equipment

352R-02 Reapproved 2010 Recommendations for Design of Beam-Column

Connections in MonolithicReinforced Concrete Structures

352.1R-11 Guide for Design of Slab-Column Connections in Monolithic Concrete Structures

355.2-07 Qualification of Post-Installed Mechanical Anchors in Concrete (ACI 355.2-07) and Commentary


VOLUMEN .5


355.3R-11 Guide for Design of Anchorage to Concrete: Examples Using ACI 318 Appendix D

355.4-11 Qualification of Post-Installed Adhesive Anchors in Concrete (ACI 355.4-11) and Commentary

357R-84 Reapproved 1997 Guide for the Design and Construction of Fixed Offshore Concrete Structures

357.2R-10 Report on Floating and Float-In Concrete Structures

357.3R-14 Guide for Design and Construction of Waterfront and Coastal Concrete Marine Structures

359-13 Code for Concrete Containments (Synopsis only)

360R-10 Guide to Design of Slabs-on-Ground

362.1R-12 Guide for the Design and Construction of Durable Parking Structures

362.2R-00 Reapproved 2013 Guide for Structural Maintenance of Parking Structures

363R-10 Report on High-Strength Concrete

363.2R-11 Guide to Quality Control and Assurance of High-Strength Concrete

364.1R-07 Guide for Evaluation of Concrete Structures before Rehabilitation

364.2T-08 Increasing Shear Capacity within Existing Reinforced Concrete Structures

364.3R-09 Guide for Cementitious Repair Material Data Sheet

364.3T-10 Treatment of Exposed Epoxy-Coated Reinforcement in Repair

364.4T-10 Determining the Load Capacity of a Structure when As-Built Drawings are Unavailable

364.5T-10 Importance of Modulus of Elasticity in Surface Repair Materials

364.6T-02 Reapproved 2011 Concrete Removal in Repairs Involving Corroded Reinforcing Steel

364.7T-02 Reapproved 2011 Evaluation and Minimization of Bruising (Microcracking) in Concrete Repair

364.8T-02 Reapproved 2011 Use of Hydrodemolition for Concrete Removal in Unbonded Post-Tensioned Systems

364.9T-03 Reapproved 2011 Cracks in a Repair

364.10T-14 Rehabilitation of Structure with Reinforcement Section Loss

365.1R-00 Service-Life Prediction

369R-11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary

370R-14 Report for the Design of Concrete Structures for Blast Effects

371R-08 Guide for the Analysis, Design, and Construction of Elevated Concrete and Composite Steel-Concrete Water Storage Tanks

372R-13 Guide to Design and Construction of Circular Wire- and Strand-Wrapped Prestressed Concrete Structures

374.1-05 Reapproved 2014 Acceptance Criteria for Moment Frames Based on Structural Testing (ACI 374.1-05) and Commentary

374.2R-13 Guide for Testing Reinforced Concrete Structural Elements under Slowly Applied Simulated Seismic Loads

376-11 Code Requirements for Design and Construction of Concrete Structures for the Containment of Refrigerated Liquefied Gases (ACI 376-11) and Commentary (Synopsis only)

408R-03 Reapproved 2012 Bond and Development of Straight Reinforcing Bars in Tension

408.2R-12 Report on Bond of Steel Reinforcing Bars Under Cyclic Loads

408.3R-09 Guide for Lap Splice and Development Length of High Relative Rib Area Reinforcing Bars in Tension and Commentary

421.1R-08 Guide to Shear Reinforcement for Slabs

421.2R-10 Guide to Seismic Design of Punching Shear Reinforcement in Flat Plates

423.3R-05 Recommendations for Concrete Members Prestressed with Unbonded Tendons

423.4R-14 Report on Corrosion and Repair of Unbonded Single-Strand Tendons

423.7-14 Specification for Unbonded Single-Strand Tendon Materials

423.8R-10 Report on Corrosion and Repair of Grouted Multistrand and Bar Tendon Systems

423.9M-10 Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout

435R-95 Reapproved 2000 Control of Deflection in Concrete Structures

435.8R-85 Reapproved 1997 Observed Deflections of Reinforced Concrete Slab Systems, and Causes of Large Deflections (Synopsis only)

437R-03 Strength Evaluation of Existing Concrete Buildings

437.1R-07 Load Tests of Concrete Structures: Methods, Magnitude, Protocols, and Acceptance Criteria

437.2-13 Code Requirements for Load Testing of Existing Concrete Structures (ACI 437.2-13) and Commentary

439.3R-07 Types of Mechanical Splices for Reinforcing Bars

439.4R-09 Report on Steel Reinforcement-Material Properties and U.S. Availability

440R-07 Report on Fiber-Reinforced Polymer (FRP) Reinforcement for Concrete Structures


VOLUMEN .6


440.1R-06 Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars

440.2R-08 Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures

440.3R-12 Guide Test Methods for Fiber-Reinforced Polymer (FRP) Composites for Reinforcing or Strengthening Concrete and Masonry

Structures

440.4R-04 Reapproved 2011 Prestressing Concrete Structures with FRP Tendons

440.5-08 Specification for Construction with Fiber-Reinforced Polymer Reinforcing Bars

440.6-08 Specification for Carbon and Glass Fiber-Reinforced Polymer Bar Materials for Concrete Reinforcement

440.7R-10 Guide for the Design and Construction of Externally Bonded Fiber-Reinforced Polymer Systems for Strengthening Unreinforced Masonry Structures

440.8-13 Specification for Carbon and Glass Fiber-Reinforced Polymer (FRP) Materials Made by Wet Layup for External Strengthening of Concrete and Masonry Structures

441R-96 High-Strength Concrete Columns

445R-99 Reapproved 2009 Recent Approaches to Shear Design of Structural Concrete

445.1R-12 Report on Torsion in Structural Concrete

446.1R-91 Reapproved 1999 Fracture Mechanics of Concrete: Concepts, Models and Determination of Material Properties (Abstract only)

446.3R-97 Finite Element Analysis of Fracture in Concrete Structures

446.4R-04 Report on Dynamic Fracture of Concrete

503.2-92 Reapproved 2003 Standard Specification for Bonding Plastic Concrete to Hardened Concrete with a Multi-Component Epoxy Adhesive

503.3-10 Specification for Producing a Skid-Resistant Surface on Concrete by the Use of Epoxy and Aggregate

503.4-92 Reapproved 2003 Standard Specification for Repairing Concrete with Epoxy Mortars

503.5R-92 Reapproved 2003 Guide for the Selection of Polymer Adhesives with Concrete

503.7-07 Specification for Crack Repair by Epoxy Injection

506R-05 Guide to Shotcrete

506.1R-08 Guide to Fiber-Reinforced Shotcrete

506.2-13 Specification for Shotcrete

506.4R-94 Reapproved 2004 Guide for the Evaluation of Shotcrete

506.5R-09 Guide for Specifying Underground Shotcrete

515.2R-13 Guide to Selecting Protective Treatments for Concrete

522R-10 Reapproved 2011 Report on Pervious Concrete

522.1-13 Specification for Pervious Concrete Pavement

523.1R-06 Guide for Cast-in-Place Low-Density Cellular Concrete

523.2R-96 Guide for Precast Cellular Concrete Floor, Roof, and Wall Units

523.3R-14 Guide for Cellular Concretes above 50/ft3 (800 kg/m3)

523.4R-09 Guide for Design and Construction with Autoclaved Aerated Concrete Panels

524R-08 Guide to Portland Cement-Based Plaster

530-13/TMS 402-13/ASCE 5-13 Building Code Requirements for Masonry Structures

530.1-13/TMS 602-13/ASCE 6-13 Specification for Masonry Structures

533R-11 Guide for Precast Concrete Wall Panels

533.1R-02 Design Responsibility for Architectural Precast-Concrete Projects


VOLUMEN .7


543R-12 Guide to Design, Manufacture, and Installation of Concrete Piles

544.1R-96 Reapproved 2009 Report on Fiber Reinforced Concrete

544.2R-89 Reapproved 2009 Measurement of Properties of Fiber Reinforced Concrete

544.3R-08 Guide for Specifying, Proportioning, and Production of Fiber-Reinforced Concrete

544.4R-88 Reapproved 2009 Design Considerations for Steel Fiber Reinforced Concrete

544.5R-10 Report on the Physical Properties and Durability of Fiber-Reinforced Concrete

546R-14 Guide to Concrete Repair

546.2R-10 Guide to Underwater Repair of Concrete

546.3R-14 Guide to Materials Selection for Concrete Repair

548.1R-09 Guide for the Use of Polymers in Concrete

548.3R-09 Report on Polymer-Modified Concrete

548.4-11 Specification for Latex-Modified Concrete Overlays

548.5R-94 Reapproved 1998 Guide for Polymer Concrete Overlays

548.8-07 Specification for Type EM (Epoxy Multi-Layer) Polymer Overlay for Bridge and Parking Garage Decks

548.9-08 Specification for Type ES (Epoxy Slurry) Polymer Overlay for Bridge and Parking Garage Decks

548.10-10 Specification for Type MMS (Methyl Methacrylate Slurry) Polymer Overlays for Bridge and Parking Garage Decks

548.11R-12 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concretes

548.12-12 Specification for Bonding Hardened Concrete and Steel to Hardened Concrete with an Epoxy Adhesive

548.13-14 Specification for Bonding Fresh Concrete to Hardened Concrete with a Multi-Component Epoxy Adhesive

549R-97 Reapproved 2009 Report on Ferrocement

549.1R-93 Reapproved 2009 Guide for the Design, Construction, and Repair of Ferrocement

549.2R-04 Reapproved 2013 Report on Thin Reinforced Cementitious Products

549.3R-09 Report on Glass Fiber-Reinforced Concrete Premix

549.4R-13 Guide to Design and Construction of Externally Bonded Fabric-Reinforced Cementitious Matrix (FRCM) Systems for Repair and Strengthening Concrete and Masonry Structures

550.1R-09 Guide to Emulating Cast-in-Place Detailing for Seismic Design of Precast Concrete Structures

550.2R-13 Design Guide for Connections in Precast Jointed Systems

551.1R-14 Guide to Tilt-Up Concrete Construction Guide

551.2R-10 Design Guide for Tilt-Up Concrete Panels

555R-01 Removal and Reuse of Hardened Concrete

562-13 Code Requirements for Evaluation, Repair, and Rehabilitation of Concrete Buildings (ACI 562-13) and Commentary

ITG-4.1-07 Specification for High-Strength Concrete in Moderate to High Seismic Applications

ITG-4.2R-06 Materials and Quality Considerations for High-Strength Concrete in Moderate to High Seismic Applications

ITG-4.3R-07 Report on Structural Design and Detailing for High-Strength Concrete in Moderate to High Seismic Applications

ITG-5.1-07 Acceptance Criteria for Special Unbonded Post-Tensioned Precast Structural Walls Based on Validation Testing and Commentary

ITG-5.2-09 Requirements for Design of a Special Unbonded Post-Tensioned Precast Shear Wall Satisfying ACI ITG-5.1 (ACI ITG-5.2-09) and Commentary

ITG-6R-10 Design Guide for the Use of ASTM A1035/A1035M Grade 100 (690) Steel Bars for Structural Concrete

ITG-7-09 Specification for Tolerances for Precast Concrete

SP-17(14) The Reinforced Concrete Design Manual in Accordance with ACI 318-14 (Synopsis only)
 

NO TE PIERDAS LAS NOVEDADES

Suscríbete a nuestro boletín informativo para estar al día de todas las promociones y novedades.

Pago seguro | Mensajerías

Copyright © Despegando S.L. 2017 | | info@ingenieriayarte.com