CONTÁCTENOS - 91 575 78 24
RSS
Estás en www.ingenieriayarte.com
Si no encuentra un libro lo buscamos por Ud.
91 575 78 24

CESTA DE LA COMPRA

Tiene 0 productos en su cesta Importe total: 0

Por favor introduzca la cantidad deseada y pulse sobre el carrito.

85 €/Ud.
Cantidad:

Foundation Design: Principles and Practices

Autor:

Descripción

Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.


Características

  • ISBN: 9781292042886
  • Páginas: 888
  • Tamaño: 17x24
  • Edición:
  • Idioma: Inglés
  • Año: 2013

Compra bajo pedidoDisponibilidad: 3 a 7 Días

Contenido Foundation Design: Principles and Practices

Covers the subject matter thoroughly and systematically, while being easy to read. Emphasizes a thorough understanding of concepts and terms before proceeding with analysis and design, and carefully integrates the principles of foundation engineering with their application to practical design problems.

NOTE: Most chapters include Questions and Practice Problems, Summary, and Comprehensive Questions and Practice Problems.)

TABLE CONTENTS

I. GENERAL PRINCIPLES.

1. Foundations in Civil Engineering
.
The Emergence of Modern Foundation Engineering.
The Foundation Engineer.
Uncertainties.
Building Codes.
Classification of Foundations.


2. Performance Requirements.

Design Loads.
Strength Requirements.
Serviceability Requirements.
Constructibility Requirements.
Economic
 Requirements.

3. Soil Mechanics.

Soil Composition.
Soil Classification.
Groundwater.
Stress.
Compressibility and Settlement.
Strength.

4. Site Exploration and Characterization.

Site Exploration.
Laboratory Testing.
In-Situ Testing.
Synthesis of Field and Laboratory Data.
Economics.

II. SHALLOW FOUNDATION ANALYSIS AND DESIGN.

5. Shallow Foundations.

Spread Footings.
Mats. Bearing Pressure.

6. Shallow Foundations

Bearing Capacity.
Bearing Capacity Failures.
Bearing Capacity Analyses in Soil
General Shear Case.
Groundwater Effects.
Allowable Bearing Capacity.
Selection of Soil Strength Parameters.
Bearing Capacity Analyses
Local and Punching Shear Cases.
Bearing Capacity on Layered Soils.
Accuracy of Bearing Capacity Analyses
Bearing Spreadsheet.

7. Shallow Foundations

Settlement.
Design Requirements.
Overview of Settlement Analysis Methods.
Induced Stresses beneath Shallow Foundations.
Settlement Analyses Based on Laboratory Tests.
Settlement Spreadsheet.
Settlement Analyses Based on In-Situ Tests.
Schmertmann Spreadsheet.
Settlement of Foundations of Stratified Soils.
Differential Settlement.
Rate of Settlement.
Accuracy of Settlement Predictions.

8. Spread Footings

Geotechnical Design.
Design for Concentric Downward Loads.
Design for Eccentric or Moment Loads.
Design for Shear Loads.
Design for Wind or Seismic Loads.
Lightly-Loaded Footings.
Footings on or near Slopes.
Footings on Frozen Soils.
Footings on Soils Prone to Scour.
Footings on Rock.

9. Spread Footings

Structural Design.
Selection of Materials.
Basis for Design Methods.
Design Loads.
Minimum Cover Requirements and Standard Dimensions.
Square Footings.
Continuous Footings.
Rectangular Footings.
Combined Footings.
Lightly-Loaded Footings.
Connections with the Superstructure.

10. Mats.

Rigid Methods.
Nonrigid Methods.
Determining the Coefficient of Subgrade Reaction.
Structural Design.
Settlement.
Bearing Capacity.

III. DEEP FOUNDATION ANALYSIS AND DESIGN.

11. Deep Foundations.

Types of Deep Foundations and Definitions.
Load Transfer.
Piles.
Drilled Shafts.
Caissons.
Mandrel-Driven Thin-Shells Filled with Concrete.
Auger-Cast Piles.
Pressure-Injected Footings.
Pile-Supported and Pile-Enhanced Mats.
Anchors.

12. Deep Foundations

Structural Integrity.
Design Philosophy.
Loads and Stresses.
Piles.
Drilled Shafts.
Caps.
Grade Beams.

13. Deep Foundations

Axial Load Capacity Based on Static Load Tests.
Load Transfer.
Conventional Load Tests.
Interpretation of Test Results.
Mobilization of Soil Resistance.
 Instrumented Load Tests.
Osterberg Load Tests.
When and Where to Use Full-Scale Load Tests.

14. Deep Foundations

Axial Load Capacity Based on Analytical Methods.
Changes in Soil during Construction.
Toe Bearing. Side Friction.
Upward Load Capacity.
Analyses Based on CPT Results.
Group Effects.
Settlement.

15. Deep Foundations

Axial Load Capacity Based on Dynamic Methods.
Pile-Driving Formulas.
Wave Equation Analyses.
High-Strain Dynamic Testing.
Low-Strain Dynamic Testing.
Conclusions.

16. Deep Foundations

Lateral Load Capacity.
Batter Piles.
Response to Lateral Loads.
Methods of Evaluating Lateral Load Capacity. p-y Method.
Evans and Duncan's Method.
Group Effects.
Improving Lateral Capacity.

17. Deep Foundations

Design.
Design Service Loads and Allowable Definitions.
Subsurface Characterization. Foundation Type.
Lateral Load Capacity.
Axial Load Capacity.
Driveability.
Structural Design.
Special Design Considerations.
Verification and Redesign during Construction.
Integrity Testing.

IV. SPECIAL TOPICS.

18. Foundations on Weak and Compressible Soils.

Deep Foundations.
Shallow Foundations.
Floating Foundations.
Soil Improvement.

19. Foundations on Expansive Soils.

The Nature, Origin, and Occurrence of Expansive Soils.
Identifying, Testing, and Evaluating Expansive Soils.
Estimating Potential Heave.
Typical Structural Distress Patterns.
Preventive Design and Construction Measures.
Other Sources of Heave.

20. Foundations on Collapsible Soils.

Origin and Occurrence of Collapsible Soils.

Identification, Sampling, and Testing. Wetting Processes.
Settlement Computations.
Collapse in Deep Compacted Fills.
Preventive and Remedial Measures.

21. Reliability-Based Design.

Methods.
LRFD for Structural Strength Requirements.
LRFD for Geotechnical Strength Requirements.
Serviceability Requirements.
The Role of Engineering Judgement.
Transition of LRFD.

V. EARTH RETAINING STRUCTURE ANALYSIS AND DESIGN.

22. Earth-Retaining Structures.

Externally Stabilized Systems.
Internally Stabilized Systems.
23. Lateral Earth Pressures.
Horizontal Stresses in Soil.
Classical Lateral Earth Pressure Theories.
Lateral Earth Pressures in Soils with c …ô and … …ô 0.
Equivalent Fluid Method.
Presumptive Lateral Earth Pressures.
Lateral Earth Pressures from Surcharge Loads.
Groundwater Effects.
Practical Application.

24. Cantilever Retaining Walls.

External Stability.
Retwall Spreadsheet.
Internal Stability (Structural Design).
Drainage and Waterproofing.
Avoidance of Frost Heave Problems.

25. Sheet Pile Walls.

Materials.
Construction Methods and Equipment.
Cantilever Sheet Pile Walls.
Braced or Anchored Sheet Pile Walls.
Appendix A: Unit Conversion Factors.
Appendix B: Computer Software.
References.
Index.

NO TE PIERDAS LAS NOVEDADES

Suscríbete a nuestro boletín informativo para estar al día de todas las promociones y novedades.

Pago seguro | Mensajerías

Copyright © Despegando S.L. 2018 | | info@ingenieriayarte.com