CONTÁCTENOS - 91 575 78 24
RSS
Estás en www.ingenieriayarte.com
Si no encuentra un libro lo buscamos por Ud.
91 575 78 24

CESTA DE LA COMPRA

Tiene 0 productos en su cesta Importe total: 0
> > Design of Steel Structures: Eurocode 3 - Design of Steel Structures. Part 1-1 - General Rules and Rules for Buildings

Por favor introduzca la cantidad deseada y pulse sobre el carrito.

86 €/Ud.
Cantidad:

Design of Steel Structures: Eurocode 3 - Design of Steel Structures. Part 1-1 - General Rules and Rules for Buildings

Autor:

Descripción

This book introduces the fundamental design concept of Eurocode 3 for current steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the principles of reliability management and the limit state approach, the material standards and their use are detailed.


Características

  • ISBN: 978-3-433-03091-2
  • Páginas: 464
  • Tamaño: 17x24
  • Edición:
  • Año: 2014

Compra bajo pedidoDisponibilidad: Inmediata

Contenido Design of Steel Structures: Eurocode 3 - Design of Steel Structures. Part 1-1 - General Rules and Rules for Buildings

This book introduces the fundamental design concept of Eurocode 3 for current steel structures in building construction, and their practical application.
Following a discussion of the basis of design, including the principles of reliability management and the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The theoretical basis and checking procedures are closely tied to the Eurocode requirements. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively.
Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will facilitate the acceptance of the code and provide for a smooth transition from earlier national codes to the Eurocode.

TABLE CONTENTS

INTRODUCTION

- General Observations
- Codes of Practice and Normalization
- Basis of Design
- Ultimate limit states
- Serviceability limit states
- Durability
- Sustainability
- Materials
- Material specification
- Mechanical properties
- Toughness and through thickness properties
- Fatigue properties
- Corrosion resistance
- Geometric Characteristics and Tolerances

STRUCTURAL ANALYSIS

- Structural Modelling, Worked Examples
- Global Analysis of Steel Structures, Worked Examples
- Classification of Cross Sections

DESIGN OF MEMBERS

- Tension, Worked Examples
- Laterally Restrained Beams, Worked Examples
- Torsion, Worked Examples
- Compression, Worked Examples
- Laterally Unrestrained Beams, Worked Examples
- Beam-Columns, Worked Examples

ELASTIC DESIGN OF STEEL STRUCTURES

- Simplified Methods of Analysis
- Amplified sway-moment method
- Sway-mode buckling length method
- Worked Example
- Member Stability of Non-prismatic Members and Components
- Non-prismatic members
- Members with intermediate restraints
- General method
- Worked Example
- Design Example 1: Elastic Design of Braced Steel-Framed Building

PLASTIC DESIGN OF STEEL STRUCTURES

- General Rules for Plastic Design
- Plastic limit analysis: method of mechanisms
- Code requirements for plastic analysis
- Methods of Analysis
- Approximate methods for pre-design
- Computational analysis
- 2nd order effects
- Worked Example
- Member Stability and Buckling Resistance
- General criteria for the verification of the stability of members with plastic hinges
. Bracings
- Verification of the stability of members with plastic hinges
- Worked Examples
- Design Example 2: Plastic Design of Industrial Building

REFERENCES

NO TE PIERDAS LAS NOVEDADES

Suscríbete a nuestro boletín informativo para estar al día de todas las promociones y novedades.

Pago seguro | Mensajerías

Copyright © Despegando S.L. 2018 | | info@ingenieriayarte.com