CONTÁCTENOS - 91 575 78 24
Estás en
Si no encuentra un libro lo buscamos por Ud.
91 575 78 24


Tiene 0 productos en su cesta Importe total: 0
> > Design and Construction of Modern Steel Railway Bridges

Por favor introduzca la cantidad deseada y pulse sobre el carrito.

165 €/Ud.

Design and Construction of Modern Steel Railway Bridges



This new edition encompasses current design methods used for steel railway bridges in both SI and Imperial (US Customary) units. It discusses the planning of railway bridges and the appropriate types of bridges based on planning considerations.


  • ISBN: 9781498734103
  • Páginas: 686
  • Tamaño: 17x24
  • Edición:
  • Idioma: Inglés
  • Año: 2017

Compra bajo pedidoDisponibilidad: 3 a 7 Días

Contenido Design and Construction of Modern Steel Railway Bridges

Updated throughout to reflect changes in the field since the first edition.

Examines the engineering properties of structural steel typically used in modern steel railway bridge design and fabrication.

Presents criteria for the maximum effects from moving loads and their use in developing design live railway loads- which is not available in typical bridge engineering books.

Explains the American Railway Engineering and Maintenance-of-way Association design specifications.

Discusses the history of iron and steel railway bridges with numerous examples.


This new edition encompasses current design methods used for steel railway bridges in both SI and Imperial (US Customary) units. It discusses the planning of railway bridges and the appropriate types of bridges based on planning considerations.

Table Contents

Preface to the Second Edition..

Chapter 1 History and Development of Steel Railway Bridges.

1.1 Introduction
1.2 Iron Railway Bridges.
   1.2.1 Cast Iron Construction
   1.2.2 Wrought Iron Construction
1.3 Steel Railway Bridges
1.4 The Development of Railway Bridge Engineering
   1.4.1 Strength of Materials and Structural Mechanics
   1.4.2 Railway Bridge Design Specifications
   1.4.3 Modern Steel Railway Bridge Design

Chapter 2 Steel for Modern Railway Bridges

2.1 Introduction
2.2 Manufacture of Structural Steel.
2.3 Engineering Properties of Steel..
2.3.1 Strength Elastic Yield Strength of Steel. Fatigue Strength of Steel
2.3.2 Ductility.
2.3.3 Fracture Resistance
2.3.4 Weldability
2.3.5 Corrosion Resistance
2.4 Types of Structural Steel
2.4.1 Carbon Steels
2.4.2 High-Strength Low-Alloy Steels
2.4.3 Heat-Treated Low-Alloy Steels
2.4.4 High-Performance Steels
2.5 Structural Steel for Railway Superstructures
2.5.1 Material Properties
2.5.2 Structural S

Chapter 3 Planning and Preliminary Design of Modern Steel Railway Bridges

3.1 Introduction
3.2 Planning of Railway Bridges
   3.2.1 Bridge Crossing Economics.
   3.2.2 Railroad Operating Requirements.
   3.2.3 Site Conditions (Public and Technical Requirements of Bridge Crossings) Regulatory Requirements. Hydrology and Hydraulics of the Bridge Crossing Highway, Railway, and Marine Clearances Geotechnical Conditions
   3.2.4 Geometry of the Track and Bridge Vertical Geometry of the Bridge
3.3 Preliminary Design of Steel Railway Bridges
   3.3.1 Bridge A Esthetics
   3.3.2 Steel Railway Bridge Superstructures Bridge Decks for Steel Railway Bridges. Bridge Framing Details
   3.3.3 Bridge Stability
   3.3.4 Pedestrian Walkways
   3.3.5 General Design Criteria Structural Analysis for Modern Steel Superstructure Design Structural Design for Modern Steel Superstructure Fabrication
   3.3.6 Fabrication Considerations
   3.3.7 Erection Considerations.
   3.3.8 Detailed Design of the Superstructure

Chapter 4 Loads and Forces on Steel Railway Bridges.

4.1 Introduction.
4.2 Dead Loads.
4.3 Railway Live Loads
   4.3.1 Static Freight Train Live Load. Cooper’s Design Live Load for Projected Railway Equipment Fatigue Design Live Load for Railway Equipment...
   4.3.2 Dynamic Freight Train Live Load Rocking and Vertical Dynamic Forces Design Impact Load. Longitudinal Forces due to Traction and Braking Centrifugal Forces Lateral Forces from Moving Freight Equipment
   4.3.3 Distribution of Live Load Distribution of Live Load for Open Deck Steel Bridges Distribution of Live Load for Ballasted Deck Steel Bridges Distribution of Live Load for Direct Fixation Deck Steel Bridges
4.4 Environmental and Other Steel Railway Bridge Design Forces
   4.4.1 Wind Forces on Steel Railway Bridges
   4.4.2 Thermal Forces from Continuous Welded Rail on Steel Railway Bridges Safe Rail Separation Criteria. Safe Stress in the CWR to Preclude Buckling Acceptable Relative Displacement between Rail-to-Deck and Deck-to-Span Design for CWR on Steel Railway Bridges.
4.4.3 Seismic Forces on Steel Railway Bridges Equivalent Static Lateral Force Response Spectrum Analysis of Steel Railway Superstructures
4.4.4 Loads Relating to Overall Stability of the Superstructure.. Derailment Load Other Loads for Overall Lateral Stability
4.4.5 Pedestrian Loads
4.5 Load and Force Combinations for Design of Steel Railway Superstructures

Chapter 5 Structural Analysis and Design of Steel Railway Bridges

5.1 Introduction
5.2 Structural Analysis of Steel Railway Superstructures
   5.2.1 Live Load Analysis of Steel Railway Superstructures. Maximum Shear Force and Bending Moment due to Moving Concentrated Loads on Simply Supported Spans Influence Lines for Maximum Effects of Moving Loads on Superstructures Equivalent Uniform Loads for Maximum Shear Force and Bending Moment in Simply Supported Spans Maximum Shear Force and Bending Moment in Simply Supported Spans from Equations and Tables Modern Structural Analysis
   5.2.2 Lateral Load Analysis of Steel Railway Superstructures Lateral Bracing Systems
5.3 Structural Design of Steel Railway Superstructures
   5.3.1 Failure Modes of Steel Railway Superstructures.
   5.3.2 Steel Railway Superstructure Design. Strength Design. Serviceability Design. Other Design Criteria for Steel Railway Bridges.

Chapter 6 Design of Axial Force Steel Members.

6.1 Introduction.
6.2 Axial Tension Members
   6.2.1 Strength of Axial Tension Members. Net Area, An, of Tension Members. Effective Net Area, Ae, of Tension Members
   6.2.2 Fatigue Strength of Axial Tension Members
   6.2.3 Serviceability of Axial Tension Members
   6.2.4 Design of Axial Tension Members for Steel Railway Bridges
6.3 Axial Compression Members
   6.3.1 Strength of Axial Compression Members. Elastic Compression Members Inelastic Compression Members Yielding of Compression Members Compression Member Design for Steel Railway Superstructures
   6.3.2 Serviceability of Axial Compression Members
   6.3.3 Axial Compression Members in Steel Railway Superstructures Buckling Strength of Built-Up Compression Members

Chapter 7 Design of Flexural Steel Members.

7.1 Introduction.
7.2 Strength Design of Noncomposite Flexural Members
   7.2.1 Bending of Laterally Supported Beams and Girders.
   7.2.2 Bending of Laterally Unsupported Beams and Girders.
   7.2.3 Shearing of Beams and Girders Shearing of Rectangular Beams. Shearing of I-Shaped Sections Design for Shearing of Shapes and Plate Girders
   7.2.4 Biaxial Bending of Beams and Girders.
   7.2.5 Preliminary Design of Beams and Girders
   7.2.6 Plate Girder Design Main Girder Elements Secondary Girder Elements.
   7.2.7 Box Girder Design Steel Box Girders.. Steel–Concrete Composite Box Girders.
7.3 Serviceability Design of Noncomposite Flexural Members
7.4 Strength Design of Steel and Concrete Composite Flexural Members
   7.4.1 Flexure in Composite Steel and Concrete Spans.
   7.4.2 Shearing of Composite Beams and Girders Web Plate Shear Shear Connection between Steel and Concrete
7.5 Serviceability Design of Composite Flexural Members

Chapter 8 Design of Steel Members for Combined Forces

8.1 Introduction
8.2 Biaxial Bending
8.3 Unsymmetrical Bending (Combined Bending and Torsion)
8.4 Combined Axial Forces and Bending of Members.
   8.4.1 Axial Tension and Uniaxial Bending
   8.4.2 Axial Compression and Uniaxial Bending Differential Equation for Axial Compression and Bending in a Simply Supported Beam Interaction Equations for Axial Compression and Uniaxial Bending
   8.4.3 Axial Compression and Biaxial Bending.
   8.4.4 AREMA Recommendations for Combined Axial Compression and Biaxial Bending
8.5 Combined Bending and Shear of Plates

Chapter 9 Design of Connections for Steel Members.

9.1 Introduction.
9.2 Welded Connections.
   9.2.1 Welding Processes for Steel Railway Bridges. Shielded Metal Arc Welding Submerged Arc Welding Flux Cored Arc Welding Stud Welding Welding Electrodes
   9.2.2 Weld Types Groove Welds Fillet Welds
   9.2.3 Joint Types
   9.2.4 Welded Joint Design Allowable Weld Stresses Fatigue Strength of Welds. Weld Line Properties Direct Axial Loads on Welded Connections Eccentrically Loaded Welded Connections. Girder Flange to Web “T” Joints
9.3 Bolted Connections
   9.3.1 Bolting Processes for Steel Railway Superstructures. Snug-Tight Bolt Installation Pretensioned Bolt Installation Slip-Critical Bolt Installation
   9.3.2 Bolt Types. Common Steel Bolts High-Strength Steel Bolts
   9.3.3 Joint Types
   9.3.4 Bolted Joint Design Allowable Bolt Stresses. Axially Loaded Members with Bolts in Shears in Shear and Tension Axially Loaded Connections with Bolts in Direct Tension Axial Member Splices. Beam and Girder Splices

Chapter 10 Construction of Steel Railway Bridges: Superstructure Fabrication

10.1 Introduction.
10.2 Fabrication Planning
     10.2.1 Project Cost Estimating.
     10.2.2 Shop Drawings for Steel Fabrication
     10.2.3 Fabrication Shop Production Scheduling and Detailed
     10.2.4 Material Procurement for Fabrication
10.3 Steel Fabrication Processes
     10.3.1 Material Preparation Layout and Marking of Plates and Shapes. Cutting of Plates and Shapes. Straightening, Bending, Curving, and Cambering of Plates and Shapes Surface Preparation.. Heat Treatment.
    10.3.2 Punching and Drilling of Plates and Shapes. Hole Quality Punching and Drilling Accuracy for Shop and Field Fasteners
    10.3.3 Shop Assembly for Fit-Up of Steel Plates and Shapes. Fabrication of Cambered Superstructure Assemblies Shop Assembly of Longitudinal Beams, Girders, and Trusses Progressive Shop Assembly of Longitudinal Beams,Girders, and Trusses Shop Assembly of Bolted Splices and Connections. Fit-Up for Shop Welded Splices and Connections Fabrication and Erection Tolerances
10.4. Bolting of Plates and Shapes..
10.5 Welding of Plates and Shapes.
    10.5.1 Shop Welding Processes
    10.5.2 Shop Welding Procedures.
    10.5.3 Effects of Welding on Plates and Shapes Welding Flaws Welding-Induced Cracking Welding-Induced Distortion Welding-Induced Residual Stresses Welding-Induced Lamellar Tearing
10.6 Coating of Steel Plates and Shapes for Railway Superstructures.
10.7 QC and QA of Fabrication.
    10.7.1 QC Inspection of Fabrication.
    10.7.2 QA Inspection of Fabrication. Shop or Detail Drawing Review Inspection of Raw Materials Inspection of Fabricated Members Assembly Inspection Bolting Inspection Welding Inspection Coatings Inspection Final Inspection for Shipment
    10.7.3 NDT for QC and QA Inspection of Welded Fabrication Dye-Penetrant Testing Magnetic Particle Testing (Figure 10.25) Ultrasonic Testing (Figure 10.26) Phased Array Ultrasonic Testing Radiographic Testing (Figure 10.27)

Chapter 11 Construction of Steel Railway Bridges: Superstructure Erection.

11.1 Introduction.
11.2 Erection Planning
     11.2.1 Erection Methods and Procedures Planning
     11.2.2 Erection Methods and Equipment Planning. Erection with Cranes and Derricks Erection on Falsework and Lateral Skidding of Superstructures. Erection by Flotation with Barges Erection with Stationary and Movable Frames. Other Erection Methods.
11.3 Erection Engineering
    11.3.1 Erection Engineering for Member Strength and Stability.
    11.3.2 Erection Engineering for Cranes and Derricks. Stationary Derricks. Mobile Cranes
   11.3.3 Erection Engineering for Falsework
   11.3.4 Erection Engineering for Cranes, Derricks, and Falsework on Barges
   11.3.5 Erection Engineering for Stationary and Movable Frames.
   11.3.6 Engineering for Other Erection Methods Erection Engineering for Launching Erection Engineering for Cantilever Construction Engineering for Tower and Cable, and Catenary High-Line Erection Engineering for SPMT Erection
11.4 Erection Execution
   11.4.1 Erection by Mobile Cranes.
   11.4.2 Falsework Construction.
   11.4.3 Erection Fit-Up.
   11.4.4 Erection of Field Splices and Connections. Welded Field Splices and Connections Bolted Field Splices and Connections
11.4.5 Field Erection Completion.


Appendix A: Design of a Ballasted through Plate Girder (BTPG) Superstructure
Appendix B: Design of a Ballasted Deck Plate Girder (BDPG) Superstructure
Appendix C: Units of Measurement.


Suscríbete a nuestro boletín informativo para estar al día de todas las promociones y novedades.

Pago seguro | Mensajerías

Copyright © Despegando S.L. 2018 | |